Modding A Hammond L-100

The smaller of these (none of these instruments are small!!) was the E-100. The feature set was reduced, compared to the classics. There were no programmable keys, and the electronics were different. And as with the L-100 and later the T-series, Hammond tried to suppress the inherent 'key click' with a dedicated key click filter.

• Hammond L100 Line Out
• Hammond Organ Modifications

A Hammond C-3 organThe Hammond Organ Company (1935–1985)Hammond Organ Australia (1986–1989)Hammond-Suzuki (1989–present)Dates1935–1975 (tonewheel models)1967–1985 (transistor models)1986–present (digital models)Price$1,193 (Model A, 1935)$2,745 (Model B-3, 1954)Technical specificationsFullVibrato, chorus, reverb, harmonic percussionInput/output2 × 61-note manuals, 25-note pedals (consoles)2 × 44-note manuals, 13-note pedals (spinets)External controlto Hammond Tone Cabinet orThe Hammond organ is an, invented by and John M. Hanert and first manufactured in 1935. Various models have been produced, most of which use sliding to specify a variety of sounds. Until 1975, Hammond organs generated sound by creating an electric current from rotating a metal near an, and then strengthening the signal with an so it can drive a. Around two million Hammond organs have been manufactured. The organ is commonly used with, and associated with, the.The organ was originally marketed and sold by the Hammond Organ Company to as a lower-cost alternative to the wind-driven, or instead of a. It quickly became popular with professional musicians in, small groups centered on the Hammond organ.

1. Hammond Organ Chorus Modification. Here's a simple modification that will increase the depth of the chorus effect on tonewheel Hammonds. All it takes to do this modification is a resistor, the value will be between 15k to 75k or so - depending on how it sounds to you - and a couple of feet of hookup wire.
2. Hey yall, I've got a Hammond Organ Model D that I picked up last year. I'm wondering whats the best way to get a 1/4' out of this thing so I can.

Organ trios were hired by owners, who found that organ trios were a much cheaper alternative to hiring a. 's use of the Hammond B-3, with its additional harmonic percussion feature, inspired a generation of, and its use became more widespread in the 1960s and 1970s in, and, as well as being an important instrument in.The Hammond Organ Company struggled financially during the 1970s, as they abandoned tonewheel organs and switched to manufacturing instruments using.

These instruments were not as popular with musicians as the tonewheels had been, and the company went out of business in 1985. The Hammond name was purchased by the, which proceeded to manufacture digital simulations of the most popular tonewheel organs.

This culminated in the production of the 'New B-3' in 2002, which provided an accurate recreation of the original B-3 organ using modern digital technology.Hammond-Suzuki continues to manufacture a variety of organs for both professional players and churches. Other companies, such as, and, have also achieved success in providing more lightweight and portable of the original tonewheel organs. The sound of a tonewheel Hammond can also be emulated using modern software such as B4. Unlike an pedalboard, a console Hammond normally has 25 pedals.Most Hammond organs have two 61-note (five-) keyboards called. As with keyboards, the two manuals are arrayed on two levels close to each other. Each is laid out in a similar manner to a piano keyboard, except that pressing a key on a Hammond results in the sound continuously playing until it is released, whereas with a piano, the note's volume decays. No difference in volume occurs regardless of how heavily or lightly the key is pressed (unlike with a piano), so overall volume is controlled by a pedal (also known as a 'swell' or 'expression' pedal).

The keys on each manual have a lightweight, which allows players to perform rapid passages more easily than on a piano. In contrast to piano and pipe organ keys, Hammond keys have a flat-front profile, commonly referred to as 'waterfall' style. Early Hammond console models had sharp edges, but starting with the B-2, these were rounded, as they were cheaper to manufacture. The M series of spinets also had waterfall keys (which has subsequently made them ideal for spares on B-3s and C-3s ), but later spinet models had 'diving board' style keys which resembled those found on a church organ. Modern Hammond-Suzuki models use waterfall keys.Hammond console organs come with a wooden played with the feet, for bass notes.

Most console Hammond pedalboards have 25 notes, with the bottom note a low C and the top note a two octaves higher. Hammond used a 25-note pedalboard because he found that on traditional 32-note pedalboards used in church pipe organs, the top seven notes were seldom used. The Hammond Concert models E, RT, RT-2, RT-3 and D-100 had 32-note (AGO) pedalboards going up to the above middle C as the top note. The RT-2, RT-3 and D-100 also contained a separate solo pedal system that had its own volume control and various other features. Spinet models have 12- or 13-note miniature pedalboards. Drawbars. The sound on a Hammond is varied using drawbars, similar to faders on anThe sound on a tonewheel Hammond organ is varied through the manipulation of drawbars.

A drawbar is a metal slider that controls the volume of a particular sound component, in a similar way to a fader on an. As a drawbar is incrementally pulled out, it increases the volume of its sound. When pushed all the way in, the volume is decreased to zero.The labeling of the drawbar derives from the system in pipe organs, in which the physical length of the pipe corresponds to the pitch produced. Most Hammonds contain nine drawbars per manual. The drawbar marked '8′' generates the of the note being played, the drawbar marked '16′' is an octave below, and the drawbars marked '4′', '2′' and '1′' are one, two and three octaves above, respectively. The other drawbars generate various other and of the note. While each individual drawbar generates a relatively pure sound similar to a flute or electronic oscillator, more complex sounds can be created by mixing the drawbars in varying amounts.Some drawbar settings have become well-known and associated with certain musicians.

A very popular setting is 888000000 (i.e., with the drawbars labelled '16′', '​ 5 1⁄ 3′' and '8′' fully pulled out), and has been identified as the 'classic' Jimmy Smith sound. Preset keys on a Hammond organ are reverse-colored and sit to the left of theIn addition to drawbars, many Hammond tonewheel organ models also include presets, which make predefined drawbar combinations available at the press of a button.

Console organs have one octave of reverse colored keys (naturals are black, sharps and flats are white) to the left of each manual, with each key activating a preset; the far left key (C), also known as the cancel key, de-activates all presets, and results in no sound coming from that manual. The two right-most preset keys (B and B ♭) activate the corresponding set of drawbars for that manual, while the other preset keys produce preselected drawbar settings that are internally wired into the preset panel. Vibrato and chorus Hammond organs have a built-in effect that provides a small variation in pitch while a note is being played, and a where a note's sound is combined with another sound at a slightly different and varying pitch. The best known vibrato and chorus system consists of six settings, V1, V2, V3, C1, C2 and C3 (i.e., three each of vibrato and chorus), which can be selected via a rotary switch. Vibrato / chorus can be selected for each manual independently. Harmonic percussion The B-3 and C-3 models introduced the concept of 'Harmonic Percussion', which was designed to emulate the percussive sounds of the,. When selected, this feature plays a decaying second- or third-harmonic when a key is pressed.

The selected percussion harmonic fades out, leaving the sustained tones the player selected with the drawbars. The volume of this percussive effect is selectable as either normal or soft. Harmonic Percussion retriggers only after all notes have been released, so legato passages sound the effect only on the very first note or chord, making Harmonic Percussion uniquely a 'single-trigger, polyphonic' effect. Start and run switches.

Console Hammond organs such as the B-3 require two switches; 'Start' to drive the and 'Run' to drive the main tonewheel generator.Before a Hammond organ can produce sound, the motor that drives the tonewheels must come up to speed. On most models, starting a Hammond organ involves two switches.

The 'Start' switch turns a dedicated, which must run for about 12 seconds. Then, the 'Run' switch is turned on for about four seconds. The 'Start' switch is then released, whereupon the organ is ready to generate sound. The H-100 and E-series consoles and L-100 and T-100 spinet organs, however, had a self-starting motor that required only a single 'On' switch. A effect can be created on the Hammond organ by turning the 'Run' switch off and on again. This briefly cuts power to the generators, causing them to run at a slower pace and generate a lower pitch for a short time.

Hammond's New B3 contains similar switches to emulate this effect, though it is a digital instrument. History The Hammond organ's technology derives from the, an instrument created in 1897. The telharmonium used revolving electric which generated tones that could be transmitted over wires. The instrument was bulky enough to require several railway cars for its transportation, because the alternators had to be large enough to generate high for a loud enough signal.

The Hammond organ solved this problem by using an.Laurens Hammond graduated from with a degree in 1916. By the start of the 1920s, he had designed a spring-driven clock, which provided enough sales for him to start his own business, the, in 1928. As well as clocks, his early inventions included and an automatic table shuffler. However, as the continued into the 1930s, sales of the bridge table declined and he decided to look elsewhere for a commercially successful product. Hammond was inspired to create the or 'phonic wheel' by listening to the moving gears of his electric clocks and the tones produced by them. He gathered pieces from a second-hand piano he had purchased for $15 and combined it with a tonewheel generator in a similar form to the telharmonium, albeit much shorter and more compact.

Since Hammond was not a musician, he asked the company's assistant treasurer, W. Lahey, to help him achieve the desired organ sound. To cut costs, Hammond made a pedalboard with only 25 notes, instead of the standard 32 on church organs, and it quickly became a de facto standard.On April 24, 1934, Hammond filed a patent for an 'electrical musical instrument', which was personally delivered to the patent office by Hanert, explaining that they could start production immediately and it would be good for local employment in Chicago. The invention was unveiled to the public in April 1935, and the first model, the Model A, was made available in June of that year.

Over 1,750 churches purchased a Hammond organ in the first three years of manufacturing, and by the end of the 1930s, over 200 instruments were being made each month. For all its subsequent success with professional musicians, the original company did not target its products at that market, principally because Hammond did not think enough money was in it. The Hammond Organ Company produced an estimated two million instruments in its lifetime; these have been described as 'probably the most successful electronic organs ever made'. In 1966, an estimated 50,000 churches had installed a Hammond.In 1936, the (FTC) filed a complaint claiming that the Hammond Company made 'false and misleading' claims in advertisements for its organ, including that the Hammond could produce 'the entire range of tone coloring of a pipe organ'. The complaint resulted in lengthy hearing proceedings, which featured a series of auditory tests that pitted a Hammond costing about $2600 against a $75,000 Skinner pipe organ in the University of Chicago. During the auditory tests, sustained tones and excerpts from musical works were played on the electric and pipe organs while a group of musicians and laymen attempted to distinguish between the instruments.

While attorneys for Hammond argued that the test listeners were wrong or guessed nearly half the time, witnesses for the FTC claimed that Hammond employees had unfairly manipulated the Skinner organ to sound more like the Hammond. In 1938, the FTC ordered Hammond to 'cease and desist' a number of advertising claims, including that its instrument was equivalent to a $10,000 pipe organ. After the FTC's decision, Hammond claimed that the hearings had vindicated his company's assertions that the organ produced 'real', 'fine', and 'beautiful' music, phrases which were each cited in the FTC's original complaint, but not included in the 'cease and desist' order. Hammond also claimed that although the hearing was expensive for his company, the proceedings generated so much publicity that 'as a result we sold enough extra organs to cover the expense.' A key ingredient to the Hammond organ's success was the use of dealerships and a sense of community.

Several dedicated organ dealers set up business in the United States and there was a bi-monthly newsletter, The Hammond Times, mailed out to subscribers. Advertisements tended to show families gathered around the instrument, often with a child playing it, as an attempt to show the organ as a center-point of home life and to encourage children to learn music.

Tonewheel organs Hammond organs, as manufactured by the original company, can be divided into two main groups:. Console organs have two 61-note manuals and a pedalboard of at least two. Most consoles do not have a built-in or speakers, so an is required.

Spinet organs have two 44-note manuals and one octave of pedals, plus an internal power amplifier and set of speakers.Console organs. The B-3 was the most popular Hammond organ, produced from 1954 to 1974The first model in production, in June 1935, was the Model A. It contained most of the features that came to be standard on all console Hammonds, including two 61-key manuals, a 25-key pedalboard, an expression pedal, 12 reverse-color preset keys, two sets of drawbars for each manual, and one for the pedals.To address concerns that the sound of the Hammond was not rich enough to accurately mimic a pipe organ, the model BC was introduced in December 1936. It included a chorus generator, in which a second tonewheel system added slightly sharp or flat tones to the overall sound of each note. The cabinet was made deeper to accommodate this.

Production of the old Model A cases stopped, but the older model continued to be available as the AB until October 1938.Criticism that the Hammond organ was more aesthetically suitable to the home instead of the church led to the introduction of the model C in September 1939. It contained the same internals as the AB or BC, but covered on the front and sides by to cover female organists' legs while playing in a skirt, often a consideration when a church organ was placed in front of the congregation. The model C did not contain the chorus generator, but had space in the cabinet for it to be fitted. The concurrent model D was a model C with a prefitted chorus. Development of the vibrato system took place during the early 1940s, and was put into production shortly after the end of.

The various models available were the BV and CV (vibrato only) and BCV and DV (vibrato and chorus). The Concert Model E was designed for the church and features a full 32-note pedalboard.The B-2 and C-2, introduced in 1949, allowed vibrato to be enabled or disabled on each manual separately. In 1954, the B-3 and C-3 models were introduced with the additional harmonic percussion feature. Despite several attempts by Hammond to replace them, these two models remained popular and stayed in continuous production through early 1975.To cater more specifically to the church market, Hammond introduced the Concert Model E in July 1937, which included a full 32-note pedalboard and four electric switches known as toe pistons, allowing various sounds to be selected by the feet. The model E was replaced by the model RT in 1949, which retained the full-sized pedalboard, but otherwise was internally identical to the B and C models. RT-2 and RT-3 models subsequently appeared in line with the B-2/C-2 and B-3/C-3, respectively. The H-100 was an unsuccessful attempt to replace the B-3In 1959, Hammond introduced the A-100 series.

It was effectively a self-contained version of the B-3/C-3, with an internal power amplifier and speakers. The organ was manufactured in a variety of different chassis, with the last two digits of the specific model number determining the style and finish of the instrument. For example, A-105 was 'Tudor styling in light oak or walnut', while the A-143 was 'warm cherry finish, Early American styling'. This model numbering scheme was used for several other series of console and spinet organs that subsequently appeared. The D-100 series, which provided a self-contained version of the RT-3, followed in 1963.The E-100 series was a cost-reduced version of the A-100 introduced in 1965, with only one set of drawbars per manual, a reduced number of presets, and a slightly different tone generator. This was followed by the H-100 series, with a redesigned tonewheel generator and various other additional features.

The organ was not particularly well made, and suffered a reputation for being unreliable. Hammond service engineer Harvey Olsen said, 'When they H-100s work, they sound pretty decent. But die-hard enthusiasts won't touch it.' Spinet organs. The L-100 spinet was particularly popular in the UK.Though the instrument had been originally designed for use in a church, Hammond realized that the amateur home market was a far more lucrative business, and started manufacturing spinet organs in the late 1940s.

Outside of the United States, they were manufactured in greater numbers than the consoles, and hence were more widely used. Several different types of M series instruments were produced between 1948 and 1964; they contained two 44-note manuals with one set of drawbars each, and a 12-note pedalboard. The M model was produced from 1948 to 1951, the M-2 from 1951 to 1955, and the M-3 from 1955 to 1964. The M series was replaced by the M-100 series in 1961, which used a numbering system to identify the body style and finish as used on earlier console series. It included the same manuals as the M, but increased the pedalboard size to 13 notes, stretching a full octave, and included a number of presets. The T-402 was one of the last tonewheel organs manufactured and included a built inThe L-100 series entered production at the same time as the M-100. It was an economy version, with various cost-cutting changes so the organ could retail for under $1000.

The vibrato was a simpler circuit than on other consoles and spinets. Two variations of the vibrato were provided, plus a chorus that mixed various vibrato signals together. The expression pedal, based on a cheaper design, was not as sophisticated as on the other organs. The L-100 was particularly popular in the UK and sold well, with several notable British musicians using it instead of a B-3 or C-3.The T series, produced from 1968 to 1975, was the last of the tonewheel spinet organs. Unlike all the earlier Hammond organs, which used for preamplification, amplification, percussion and chorus-vibrato control, the T series used all-, circuitry, though, unlike the L-100, it did include the scanner-vibrato as seen on the B-3. Other than the T-100 series models, all other T-Series models included a built-in rotating Leslie speaker and some included an analog, while the T-500 also included a built-in cassette recorder.

It was one of the last tonewheel Hammonds produced. Transistor organs. Hammond started making transistor organs by the mid-1970sIn the 1960s, Hammond started making transistor organs. The first organ that bridged the gap between tonewheel and transistor was the X-66, introduced in May 1967.

The X-66 contained just 12 tonewheels, and used electronics for. It contained separate 'vibrato bass' and 'vibrato treble' in an attempt to simulate a Leslie speaker. Hammond designed it as the company's flagship product, in response to market competition and to replace the B-3. However, it was considered expensive at $9,795 and it sold poorly. It did not sound like a B-3.Hammond introduced their first (IC) model, the Concorde, in 1971. The company had stopped manufacturing tonewheel organs entirely by 1975, due to increased financial inefficiency, and switched to making IC models full-time.

Console models included the 8000 Aurora (1976) and 8000M Aurora (1977), which contained drawbars and a built-in rotating speaker. Spinet organs included the Romance series, manufactured between 1977 and 1983. In 1979, a Japanese offshoot, Nihon Hammond, introduced the X-5, a portable solid-state clone of the B-3.

Hammond-Suzuki produced the XB-3, a digital emulation of a tonewheel organ, during the 1990sLaurens Hammond died in 1973, and the company struggled to survive, proposing an acquiring of in 1972, which was turned down. Roland's did not believe it was practical at that point to move the entire manufacturing operation from Chicago to Japan, and also viewed Hammond's declining sales figures as a problem.In 1985, Hammond went out of business, though servicing and spares continued to be available after this under the name of The Organ Service Company. In early 1986, the Hammond brand and rights were acquired by Hammond Organ Australia, run by Noel Crabbe.Then in 1989, the name was purchased by the Suzuki Musical Instrument Corporation, which rebranded the company as Hammond-Suzuki. Although nominally a Japanese company, founder Manji Suzuki was a fan of the instrument and retained several former Hammond Organ Company staff for research and development, and ensured that production would partially remain in the United States. The new company produced their own brand of portable organs, including the XB-2, XB-3 and XB-5. 's Rod Spark, a longtime Hammond enthusiast, said these models were 'a matter of taste, of course, but I don't think they're a patch on the old ones'.In 2002, Hammond-Suzuki launched the New B-3, a recreation of the original electromechanical instrument using contemporary electronics and a digital tonewheel simulator.

The New B-3 is constructed to appear like the original B-3, and the designers attempted to retain the subtle nuances of the familiar B-3 sound. Hammond-Suzuki promotional material states that it would be difficult for even an experienced B-3 player to distinguish between the old and new B-3 organs. A review of the New B-3 by Hugh Robjohns called it 'a true replica of an original B-3. In terms of the look and layout, and the actual sound.' The instrument project nearly stalled after a breakdown in negotiations between Japanese and United States staff, the latter of whom insisted on manufacturing the case in the United States and designing the organ to identical specifications to the original. The Hammond SK1 included emulations of and other keyboard sounds in addition to organ.The company has since released the XK-3, a single-manual organ using the same digital tonewheel technology as the New B-3.

The XK-3 is part of a modular system that allows an integrated lower manual and pedals to be added. In response to some clones, including a variety of vintage keyboards in a single package, Hammond released the SK series of organs, which include, Hohner, and samples of wind and brass instruments alongside the standard drawbar and tonewheel emulation. Magazine's Stephen Fortner praised the single manual SK1, indicated that it gave an accurate sound throughout the range of drawbar settings, and said the organ sound was 'fat, warm, utterly authentic'.

The XK-1c model was introduced in early 2014, which is simply an organ-only version of the SK1. An updated flagship organ, the XK-5, was launched in 2016, and a stage keyboard, the SK-X followed in 2019.In the US, Hammond manufactures a number of dedicated console organs, including the B-3mk2 and the C-3mk2, and the A-405, a Chapel Console Organ. The company has a dedicated Church Advisory Team that provides a consultancy, so churches can choose the most appropriate instrument. Speakers Tone cabinet The authorized to use with a console organ was the Hammond Tone Cabinet, which housed an external amplifier and speaker in a cabinet. The cabinet carried a along with the necessary mains power directly from the organ, using a six-pin cable.

Spinet organs contained a built-in and, so did not require a tone cabinet.The tone cabinet was originally the only method of adding to a Hammond organ; reverb was not fitted to older organs. The most commercially successful tone cabinets were probably the PR series, particularly the 40-watt PR40. Leslie speaker.

A Leslie speaker with a transparent caseMany players prefer to play the Hammond through a rotating speaker cabinet known, after several name changes, as a, after its inventor Donald J. The Leslie system is an integrated speaker/amplifier combination in which sound is emitted by a rotating over a stationary treble, and a rotating beneath a stationary bass. This creates a characteristic sound because of the constantly changing pitch shifts that result from the created by the moving sound sources.The Leslie was originally designed to mimic the complex tones and constantly shifting sources of sound emanating from a large group of ranks in a pipe organ. The effect varies depending on the speed of the rotors, which can be toggled between fast (tremolo) and slow (chorale) using a console or pedal switch, with the most distinctive effect occurring as the speaker rotation speed changes. The most popular Leslies were the 122, which accepted a balanced signal suitable for console organs, and the 147, which accepted an unbalanced signal and could be used for spinet organs with a suitable adapter. The Pro-Line series of Leslies which were made to be portable for gigging bands using solid-state amps were popular during the 1970s.

A 'half-moon'-shaped switch for changing the speed of a Leslie speakerLeslie initially tried to sell his invention to Hammond, but Laurens Hammond was unimpressed and declined to purchase it. Hammond modified their interface connectors to be 'Leslie-proof', but Leslie quickly engineered a workaround. The Leslie company was sold to in 1965 and was finally bought by Hammond in 1980. Hammond-Suzuki acquired the rights to Leslie in 1992; the company currently markets a variety of speakers under this name.

As well as faithful reissues of the original 122 speaker, the company announced in 2013 that they would start manufacturing a standalone Leslie simulator in a. Tone generation. The tonewheel rotates beside an electromagnetic pickup.Although they are sometimes included in the category of electronic organs, the majority of Hammond organs are, strictly speaking, or rather than electronic organs, because the sound is produced by moving parts rather than electronic oscillators.The basic component sound of a Hammond organ comes from a tonewheel. Each one rotates in front of an electromagnetic pickup. The variation in the induces a small at a particular frequency, which represents a signal similar to a. When a key is pressed on the organ, it completes a circuit of nine electrical switches, which are linked to the drawbars. The position of the drawbars, combined with the switches selected by the key pressed, determines which tonewheels are allowed to sound.

Every tonewheel is connected to a synchronous motor via a system of gears, which ensures that each note remains at a constant relative pitch to every other. The combined signal from all depressed keys and pedals is fed through to the vibrato system, which is driven by a metal scanner. As the scanner rotates around a set of pickups, it changes the pitch of the overall sound slightly. From here, the sound is sent to the main amplifier, and on to the audio speakers. A prototype light-weight tonewheel generator, produced at the Hammond Organ Company's factory inThe Hammond organ makes technical compromises in the notes it generates. Rather than produce harmonics that are exact multiples of the fundamental as in, it uses the nearest-available frequencies generated by the tonewheels.

The only guaranteed frequency for a Hammond's tuning is.or 'leakage' occurs when the instrument's magnetic pickups receive the signal from rotating metal tonewheels other than those selected by the organist. Hammond considered crosstalk a defect that required correcting, and in 1963 introduced a new level of resistor–capacitor filtering to greatly reduce this crosstalk, along with 50–60 Hz. However, the sound of tonewheel crosstalk is now considered part of the signature of the Hammond organ, to the extent that modern digital clones explicitly emulate it.Some Hammond organs have an audible pop or click when a key is pressed. Originally, key click was considered a design defect and Hammond worked to eliminate or at least reduce it with equalization filters. However, many performers liked the percussive effect, and it has been accepted as part of the classic sound. Hammond research and development engineer Alan Young said, 'the professionals who were playing popular music liked that the attack was so prominent. And they objected when it was eliminated.'

Clones and emulation devices. According to journalist Gordon Reid, the 'came close to emulating the true depth and passion of a vintage Hammond.' The original Hammond organ was never designed to be transported regularly. A Hammond B-3 organ, bench, and pedalboard weighs 425 pounds (193 kg). This weight, combined with that of a Leslie speaker, makes the instrument cumbersome and difficult to move between venues. This created a demand for a more portable and reliable way of generating the same sound.

Electronic and digital keyboards that imitate the sound of the Hammond are referred to as '.The first attempts to electronically copy a Hammond appeared in the 1970s, including the Roland VK-1 and VK-9, the Yamaha YP45D, and the Crumar Organiser. The (single manual) and BX-3 (dual manual) were the first lightweight organs to produce a comparable sound to the original. Sound on Sound 's Gordon Reid said that the CX-3 'came close to emulating the true depth and passion of a vintage Hammond,' particularly when played through a Leslie speaker. The emulated drawbars using buttons and a displayThe, introduced in 1997, attempted to emulate the sound of a Hammond using technology. An updated version, the, which appeared in 2002, also provided emulations of other vintage keyboards and provided a connector for a Leslie. Introduced the in 2001; this used buttons to emulate the physical action of pulling or pushing a drawbar, with an LED graph indicating its current state.

Clavia has released several updated versions of the Electro since then, and introduced the with the same technology. The was Clavia's first organ with real drawbars., founded by former Hammond-Suzuki sales representative Tom Tuson in 2003, specialises in Hammond clones, and has an endorsement from.The Hammond organ has also been emulated in software. One prominent emulator is the B4 series, which has been praised for its attention to detail and choice of features. (now part of ) has also produced a software emulation, the EVB3.

This has led to a Hammond organ module with all controls and features of the original instrument in the audio production suite. Notable players. 's use of the Hammond organ in the 1950s gave him commercial success and influenced other notable organistsEarly customers of the Hammond included, and.The instrument was not initially favored by classical organ purists, because the tones of two notes an octave apart were in exact synchronization, as opposed to the slight variation present on a pipe organ. However, the instrument did gradually become popular with jazz players. One of the first performers to use the Hammond organ was, who was known as the 'first lady of the Hammond organ'. And also started using the Hammond.

Organist thinks the Hammond became 'the poor man's big band', but because of that, it became more economical to book.Jimmy Smith began to play Hammond regularly in the 1950s, particularly in his sessions for the label between 1956 and 1963. He eschewed a bass player, and played all the bass parts himself using the pedals, generally using a walking bassline on the pedals in combination with percussive left-hand chords.

His trio format, composed of organ, guitar, and drums, became internationally famous following an appearance at the in 1957. Medeski says musicians 'were inspired when they heard Jimmy Smith's records.' Switched from piano to Hammond in 1959, and toured regularly throughout the 1960s and 1970s. In his Hammond playing, sought partly to replicate the sound achieved by McDuff in his arrangement of 'Rock Candy'. An admirer of 's work also, particularly the 1965 instrumental ', Emerson limited the use of Leslie because he felt that was Preston's domain at the time, whereas he himself was approaching the instrument with an aesthetic combining 'a white European attitude', classical music, and rock. 'I took to riding the L100 like a bucking bronco.

It weighs 350 lb; when it's on top of you, you need the adrenalin rush you get onstage to chuck it around.' Is cited as being the bridge from to rock. British organist said the Hammond 'became popular in the UK when people such as and artists on the label came over to London and played gigs.' First encountered the Hammond in 1966, having heard the ' playing one. When Fisher asked if he could play it, McLagan told him, 'They're yelling out for Hammond players; why don't you go out and buy one for yourself?' Fisher went on to play the organ lines on 's ', which topped the UK charts in the summer of 1967.

Started his musical career with the playing guitar and piano, but he switched to Hammond when he hired one to record '.became interested in the Hammond after had introduced him to Jimmy Smith's music, and started to write material with it. His brother specifically requested he play the instrument when forming the, and he was presented with a brand new B-3 and Leslie 122RV upon joining. Allman recalls the instrument was cumbersome to transport, particularly on flights of stairs, which often required the whole band's assistance. Author Frank Moriarty considers Allman's Hammond playing a vital ingredient of the band's sound.

Put his Hammond C-3 through an to fit in with 's hard rock sound.' S became inspired to play the Hammond after hearing Jimmy Smith's 'Walk on the Wild Side'. He modified his Hammond so it could be played through a to get a growling, overdriven sound, which became known as his trademark and he is strongly identified with it.

This organ was later acquired. 's modified his Hammond E-100 extensively with customised electronics, including the ability to put effects such as on one manual but not the other, and rewiring the motor. The modifications created, in Banton's own words, 'unimaginable sonic chaos.' Has achieved critical success in the jazz genre using both original tonewheel Hammonds and the 'New B-3'.The Hammond was a key instrument in music. Author Edward Macan thinks this is because of its versatility, allowing both chords and lead lines to be played, and a choice between quiet and clean, and what Emerson described as a 'tacky, aggressive, almost distorted, angry sound.' Emerson first found commercial success with, with whom he used and abused an L-100, putting knives in the instrument, setting fire to it, playing it upside down, or riding it across stage in the manner of a horse. He continued to play the instrument in this manner alongside other keyboards in.

Other prominent Hammond organists in progressive rock include ' and 's, 's and, 's, 's, 's, 's, and 's. Banks later claimed he only used the Hammond because a piano was impractical to transport to gigs.and music made frequent use of the Hammond throughout the 1960s and 1970s. Started to play the instrument after hearing Booker T & The MGs' ', although he complained about its weight. Winston Wright was regarded in the music scene of as one of the best organ players, and used the Hammond when performing live with, as well as playing it on sessions with, and., best known as ' keyboard player, made prominent use of the Hammond on ', as recorded at the, for the album.

Has been praised for her work on the Hammond'sThe Hammond organ was perceived as outdated by the late 1970s, particularly in the UK, where it was often used to perform pop songs in social clubs. And bands tended to prefer second-hand from the 1960s, or use no keyboards at all.

Other groups started taking advantage of cheaper and more portable that were starting to come onto the market. ' was an exception to this, and used a Hammond onstage during the band's early career. Andy Thompson, better known for being an aficionado of the, stated, 'the Hammond never really went away. There are a lot of studios that have had a B-3 or C-3 sitting away in there since the 70s.'

The instrument underwent a brief renaissance in the 1980s with the movement. Taylor played the Hammond through the 1980s, first with and later with the. The sound of the Hammond has appeared in music, albeit mostly via samples. A significant use is the ' 1992 single ', which features a Hammond mixed into the foreground (the instrument was recorded live rather than being sampled).Jazz, blues, and gospel musicians continued to use Hammond organs into the 21st century.

Has received critical acclaim for her performances on the Hammond, particularly her use of the bass pedals, and has modified the instrument to include triggered by the pedals. Joey DeFrancesco embraced the instrument during the 1990s, and later collaborated with Jimmy Smith. He is positive about the future of the Hammond organ, saying 'Everybody loves it.

It makes you feel good. I think it's bigger now than ever.'

-winning jazz keyboardist learned to play the Hammond organ at age two and used it on 2016's The Revival. Chicago Sun-Times.

January 3, 1986. Archived from on June 11, 2014. Retrieved July 31, 2013.

^, p. 14. (in Japanese). Hammond Suzuki Co., Ltd. April 22, 2005. Archived from on July 15, 2009.

^, p. 68. ^, p. 69., p. 168., p. 151., p. 34.

^, p. 76., p. 33-34., p. 50. ^, p. 89. Vintage Organ Parts. Retrieved March 20, 2017. (PDF). Retrieved March 20, 2017., p. 58.

^, p. 447. ^ Robjohns, Hugh. Sound On Sound (July 2003). Archived from on November 6, 2006., p. 361.

^ Spark, Rod (October 1997). Retrieved July 30, 2013.

(photograph). TheatreOrgans.com., p. 52., p. 53., p. 47. Reid, Gordon (January 2004). Sound On Sound. Archived from on August 27, 2008. Retrieved July 30, 2013., pp. 83,87. ^, p. 369., p. 36., p. 55.

^, p. 63., p. 57., Laurens Hammond, ', issued April 24, 1934., p. 59. ^, p. 319., p. 60., p. 26. 'Federal Trade Commission Decision: Official Findings and Order'.

The American Organist. August 1938. 'Federal Trade Commission Sponsors Auditory Test—Hammond vs. $75,000 Organ'. Piano Trade Magazine.

April 1937. 'Hammond Arguments presented in Briefs'. May 1, 1938. 'Hammond is Ordered to 'Cease and Desist '. August 1, 1938., p. 16., p. 18., p. 25., p. 169. ^, p. 33., p. 71., p. 54., p. 33,49.

^, p. 83., p. 72., p. 74., pp. 74–75., p. 77., p. 85-86. ^, p. 78., p. 47., p. 91., p. 87., p. 92. The Hammond Organ Company.

Retrieved August 1, 2013. The Hammond Organ Company.

Retrieved August 1, 2013., pp. 94–95. ^, p. 176., p. 58,63.

Welch, Jerry (2011). Organ Service Company, Inc.

Retrieved July 31, 2013. Reid, Gordon. Sound On Sound (November 2004). 1972 — The Birth Of Roland: 'Almost immediately after establishing the company, Kakehashi received an offer from the Hammond Organ Company; they wished to buy a 60-percent shareholding in the new business. However, he had no wish to be the junior partner in his own company for a second time, so he decided to forge ahead on his own.' . Welch, Jerry (2011).

Organ Service Company, Inc. Retrieved July 31, 2013., p. 135., p. 143., p. 154. ^ Robjohns, Hugh (July 2005). Retrieved July 31, 2013. Archived from on August 11, 2013. Retrieved July 31, 2013.

Fortner, Stephen (December 13, 2011). Archived from on May 27, 2013.

Retrieved July 31, 2013. Orant, Tony (February 7, 2014). Retrieved August 20, 2014. June 8, 2016.

Retrieved July 18, 2017. Robjohns, Hugh (May 2019). Sound on Sound. Retrieved June 20, 2019. Retrieved July 31, 2013. Watkinson, Mike (April 2004). Sound on Sound.

Retrieved July 30, 2013. Goff Professional. Retrieved July 30, 2013.

Retrieved July 30, 2013., p. 65., p. 63., p. 427., p. 129., p. 164., p. 130. Vol. 77 no. 38.

September 18, 1965. Retrieved August 1, 2013. Reid, Gordon (November 2003). Sound On Sound. Retrieved April 25, 2011. Keyboard Exchange International.

Hammond L100 Line Out

Archived from on May 19, 2000. Retrieved April 25, 2011., p. 71., p. 441., p. 48., p. 189. Goff Professional. Retrieved July 30, 2013., p. 105., p. 45. ^ Reid, Gordon (January 2001). Archived from on February 18, 2015.

Retrieved July 30, 2013., p. 9. Mercury News. February 14, 2014.

Retrieved March 17, 2017. ^ Reid, Gordon (December 2001). Retrieved July 30, 2013.

Magnus, Nick (July 1997). Retrieved July 30, 2013. Reid, Gordon (September 2002).

Archived from on March 22, 2014. Retrieved July 30, 2013. Reid, Gordon (October 2012). Retrieved July 30, 2013., p. 148. Magnus, Nick (January 2006). Retrieved July 30, 2003. Retrieved August 17, 2015., p. 15.

^, p. 384., p. 153., p. 18., p. 1170., p. 19., p. 236., p. 168., p. 169. Glancey, Jonathan (May 31, 2002). The Guardian. Retrieved August 1, 2013., p. 21., p. 65., p. 66., p. 33., p. 73., p. 67-68., p. 97., pp. 100–101., p. 44. Cohen, Scott (October 1974). Circus Magazine: 42–45. Retrieved July 30, 2013., p. 122.

Jon Lord (official site). Retrieved August 17, 2013., p. 186., p. 34., p. 158., p. 200., p. 71., p. 320., p. 596., pp. 165–166., p. 104,160., pp. 136–137., p. 531., p. 507., p. 22., p. 325., pp. 96–110. Huey, Steve. Retrieved July 30, 2013., p. 248. Michelle, Mercer.

Retrieved May 15, 2016.Bibliography.

Hammond Organ Modifications

Find:Modify Search:Text to Find:Boolean: OrAndwith Topic title:Find: Messages ThreadsAuthored by:Dated from: ToFormat: YYYY-MM-DD, e.g. 2004-01-31and Exact Match:and from IP: N/A Only OptionFinds an exact phrase, e.g. VPI 16.5and Sort By:Score AuthorDate Order: Descending Ascendingand Rank By:Forum o or None (use sort by) oOnly Option/from Forum.